CUSTOM INSULATORS

POLYCAST WILL CUSTOM DESIGN AN INSULATOR TO SUIT YOUR SPECIAL REQUIREMENTS. To assist you, reference may be made to Standards and Ratings - Insulators 1) Which of the following best describes your requirements? Please select any of the following:

STYLE  FEATURES, STANDARD CHOICE PII20A   Switch & Bus, A-20 Strength Class,  Indoor PII30A  Switch & Bus, A-30 Strength Class,  Indoor  PII40A  Switch & Bus, A-40 Strength Class,   Indoor PII40B  Switch & Bus, B-40 Strength Class,  Indoor,with four hole base for wall or floor mounting PII50B  Switch & Bus, B-50 Strength Class,  Indoor, with four hole base for wall or floor mounting POI20A  Switch & Bus, A-20 Strength Class,  Outdoor  POI30A   Switch & Bus, A-30 Strength Class,  Outdoor POI40A  Switch & Bus, A-40 Strength Class,  Outdoor  POI40B   Switch & Bus, B-40 Strength Class,  Outdoor, with four hole base for  wall or floor mounting POI50B  Switch & Bus, B-50 Strength Class,  Outdoor, with four hole base for  wall or floor mounting The above insulators are available with single or optional multiple mounting hole configurations. UNC threaded mounting holes are zinc plated steel inserts. Metric inserts are available as special order. OTHER (Specify)

STYLE  FEATURES, SPECIAL CHOICE PIICSC  Corrugated, clean environment. PIIX  Corrugated, high cantilever PIID  Tapered top/ bottom, single skirt,  clean environment PIIT  Tapered top to bottom, unskirted,  clean environment PIIW   Wedge or block insulator PIISL  Sleeve insulator *PIICV  Corrugated, slotted for cable *PIIV  Skirted, slotted for bus or cable *PIIG   Skirted, special inserts, high  cantilever *PIIF  Shaped for increased clearance *PIICR   European style, center/optional  anti-rotation inserts *PIISE  European style, center/optional  anti-rotation inserts Except for those marked with an asterisk, the above insulators have a single mounting hole each end. UNC threaded mounting holes are brass, aluminum, or zinc plated steel. Metric inserts are available as special order. Many of these units are also available in cycloaliphatic epoxy for use in high pollution or high humidity applications (for reference, PII becomes POI). * These insulators have more than one insert or have special insert options. OTHER (Specify)

2) Select the applicable standard(s): ANSI CSA IEC

OTHER (Specify)

3) Complete the following (where applicable):

Application:	Indoor	Outdoor	Voltage Class	Current Rating	Impulse Level	Hipot Level

Strength Class	Mounting Holes BCD	Mounting  Configuration, Top	Mounting Configuration,  Bottom	Max Diameter	Max  Height

4) Other Comments: (Address: Pollution, altitude, temperature extremes, environmental conditions, special concerns)

5) How may we reach you?

Name/Title:		Phone Number:
Company:		Fax Number:
Address:		e-mail address: